Chapter 2 Troubleshooting
2.3 Error Code FIP
2-60
FIP1.14 061-370 IOT ROS Failure
Step Check and Action Yes No
Parts considered to be the cause
ROS ASSY (PL2.1.1)
HARNESS ROS-MCU (PL2.1.2)
HARNESS VIDEO (PL2.1.3)
PWBA MCU (PL18.2.2)
PWBA ESS (PL18.1.2)
1
Check connector connection
Check the connections between the ROS ASSY and
the PWBA MCU, as well as between the ROS ASSY
and the PWBA ESS.
Are the HARNESS ROS-MCU (P/J501-P/J19), ROS
ASSY (P/J18), and the HARNESS VIDEO (P/J502-
P/J422) connected securely?
Go to Step 2.
Securely connect the
HARNESS ROS-MCU
(P/J501-P/J19), ROS
ASSY (P/J18), and the
HARNESS VIDEO (P/
J502-P/J422)
2
Check after replacing the ROS ASSY
Replace the ROS ASSY. (REP 2.1)
Does an error occur?
Go to Step 3. End of work.
3
Check after replacing the PWBA MCU
Replace the PWBA MCU. (REP 18.2)
Does an error occur?
Replace the
PWBA ESS.
(REP18.1)
End of work.
To Next Page
Loading...
Need help?
General
