Chapter 6 General
6.1 Specifications
6-7
6.1.9 Resolution
6.1.9.1 Line Density in Fast Scan Direction
z 600 dots/25.4mm
z 1200 dots/25.4mm
6.1.9.2 Line Density in Slow Scan Direction
z 600 dots/25.4mm
z 1200 dots/25.4mm fixed
6.1.10 Operation Mode
6.1.10.1 Power-off Status
The power switch is off and no power is supplied. The machine does not operate.
6.1.10.2 Ready (Standby) Mode
This mode is called as "Energy Saving: Step 1" for BAM(Blue Angel Mark) standard.
When the system starts up by power-on, it shifts from the power-off status to the Standby mode.
At this point, the provided functions (copying, FAX sending, network scanning) become available via the oper-
ator panel. FAX receiving, printing, Direct FAX, and local scanning also become available.
6.1.10.3 Running Mode
There are the Print mode, Scan mode, and FAX communication mode in which the IOT, IIT, and FAX commu-
nication operate respectively.
6.1.10.4 Print Mode
In this mode, the IOT is operating for printing, copying, FAX received printing, and report printing.
6.1.10.5 Scan Mode
In this mode, the IIT is operating for copy scanning, local scanning, network scanning, and FAX scanning.
6.1.10.6 FAX Communication Mode
In this mode, FAX sending/receiving is in progress.
To Next Page
Loading...
Need help?
General
