Chapter 4 Disassembly / Assembly and Adjustment
4.2 Removal / Replacement
4-107
REP18.4 (SCC) PWB LVPS 110V / 220V (PL18.1.5)
Always wear a wrist band during servicing the PWB for protect from the damage by the static electricity.
[Removal]
1 Open the KIT MSI COVER.
2 Pull the TRAY ASSY MSI out of the printer.
3 Remove the COVER FRONT TOP ALL AIO ASSY. (REP19.1)
4 Remove the KIT COVER ASSY REAR AIO. (REP19.7)
5 Remove the COVER ASSY WINDOW ESS LOW. (REP19.2)
6 Remove the KIT COVER SIDE L AIO ASSY. (REP19.6)
To Next Page
Loading...
