Chapter 4 Disassembly / Assembly and Adjustment
4.2 Removal / Replacement
4-104
REP18.3 (SCC) HVPS (PL18.2.5)
Always wear a wrist band during servicing the PWB for protect from the damage by the static electricity.
1 Open the KIT MSI COVER.
2 Pull the TRAY ASSY MSI out of the printer.
3 Remove the COVER FRONT TOP ALL AIO ASSY. (REP19.1)
4 Remove the KIT COVER ASSY REAR AIO. (REP19.7)
5 Remove the COVER SIDE R AIO. (REP19.4)
To Next Page
Loading...
