Chapter 4 Disassembly / Assembly and Adjustment
4.2 Removal / Replacement
4-43
REP5.3 (SCC) MOTOR DISP N (PL5.1.9)
[Removal]
1 Open the KIT MSI COVER.
2 Pull the TRAY ASSY MSI out of the printer.
3 Remove the COVER FRONT TOP ALL AIO ASSY. (REP19.1)
4 Remove the KIT COVER ASSY REAR AIO. (REP19.7)
5 Remove the COVER SIDE R AIO. (REP19.4)
6 Remove the XERO ASSY. (REP8.1)
7 Disengage all connectors from the PWB MCU. (REP18.2)
To Next Page
Loading...
