Introduction
1. Getting to Know the Service Manual
Preface-1
1. Getting to Know the Service Manual
This manual is used as the standard service manual for the DocuPrint M355df.
• Publication Comment Sheet
Enter any comments and/or corrections regarding the DocuPrint M355df ser
v
ice manual into the
Publication Comment Sheet, and send it to FX/TS PSC OSG via OpCo Technical Service
Department
2. How to Use the Service Manual
This manual describes the standard procedures for the servicing of the product. Refer to Chapter 1
Service Call Procedure for efficient and effective servicing during maintenance calls.
2.1 Contents of Manual
• Hardware
This manual summarizes all technical information on the product.
• Chapters
This manual is divided into ten chapters as described below.
Chapter 1 Service Call Procedure
Th
is
chapter describes the general work and servicing procedures for the maintenance of the
product.
Chapter 2 Troubleshooting
This chapter describes the troubleshooting procedures other than image quality
troubleshooting of the product. It also describes how to use the diagnostics and some
programs.
Chapter 3 Image Quality Troubleshooting
This chapter describes the image quality troubleshooting procedures of the product.
Chapter 4 Disassembly/Assembly and Adjustment
This chapter describes the disassembly, assembly, adjustment and replacement procedures
for the components of the product.
Chapter 5 Parts List
This chapter contains the spare parts list for the product.
Chapter 6 General
This chapter contains the specification, service modes, and service data of the product.
Chapter 7 Wiring Data
This chapter contains the information about the Wiring Connector List/Locations and the
Wiring Data for the product.
Chapter 8 Accessories (not yet issued)
This chapter contains the information on related products.
Chapter 9 Installation / Removal (not yet issued)
This chapter contains the installation and removal procedures and product-specific options.
Chapter 10 Mechanism & Functions Overview
This chapter gives an overview of the functions of the main components of the product.
To Next Page
Loading...
Need help?
General
