Chapter 6 General
6.1 Specifications
6-17
6.1.28.4 Secure Print
When the expansion memory (512MB) is installed, the printer holds print data in memory, including a user
password (1-12 digits), a user name, and a document name specified via the printer driver. The data is not
printed until the same password, user name, and document name are specified at the printer UI. The user can
select whether to clear the data after printing. The data remains in the printer as long as it is not cleared. The
data on the memory is cleared when the printer is turned off.
6.1.28.5 Saved Job
When a print job is set as “Saved Job” in the Job Type menu on the driver, no one can print the job from the
operator panel if he/she knows the password. And this print job remains in the printer unless it is deleted
intentionally. The data on the memory is cleared when the printer is turned off. SFP/MFP Model can select the
Saved job when the expansion memory (512MB) is installed.
6.1.28.6 Proof Print
When the expansion memory (512MB) is installed, the proof print can be selected only when multiple sets of
prints are specified via the printer driver. The printer prints only the first set of the print data. Then the user can
select whether the remaining sets are to be printed or not (the remaining data is cleared) when the same user
name and document name are entered at the Panel UI. The data remains in the printer as long as it is not
cleared. The data on the memory is cleared when the printer is turned off.
6.1.28.7 IP Filter
The user can select to accept or reject jobs for the specified IP address. Up to 5 IP addresses can be speci-
fied. IP filter is available only to LPD and Port 9100.
To Next Page
Loading...
Need help?
General
