Chapter 6 General
6.1 Specifications
6-9
6.1.13 Machine Status
DocuPrint M355 df (MFP Model)
*1: Interface Port: USB Port (Type A/Type B), Ethernet Port
6.1.14 Warm-up Time
6.1.15 FPOT (First Print Output Time)
The table below shows FPOT (First Print Output Time). FPOT is defined as the time from when the printer
driver issues a print request in the Standby mode until when the first printed sheet is output completely. Pro-
cess control time is not included.
The job is only set by the previous job and is always kept even after Power-off/on.)
Table 6-8
Status
Expo-
sure
Developer
and trans-
fer
Fusing
Unit
Cool-
ing fan
IIT MCU
Operation
panel
Control-
ler
Inter-
face
Port
*1
Running Working Working Working
Work-
ing
Work-
ing
Work-
ing
Working
Working Working
Ready
Rest Rest
Standby
Temp.
Rest
Low
Power
Rest Rest Rest
Power
Saver but-
ton and
Ready LED
Only
Sleep Rest
Table 6-9
Event Status transition Warm up time Condition
Power On Power off to Ready 20 sec or less
20°C/60%RH, Rated voltage.
Power On after seasoning for
3 hours or more.
Wake up from Low Power Mode Sleep to Ready
16 sec or less
20°C/60%RH, Rated voltage,
Plain paper job in Sleep
Mode shift and 1 hour.
Wake up from Sleep Mode
Deep sleep to
Ready
Table 6-10
Paper Size Paper Type Paper Tray
FPOT
(Ready)
A4SEF Plain MSI 5.5 sec. or less
A4SEF Plain Standard Tray 5.5 sec. or less
A4SEF Plain Optional Tray 6 sec. or less
To Next Page
Loading...
