Chapter 6 General
6.6 IOT Diag
6-55
6.6.5 Dew Prevention
Sets whether to enable the Dew Prevention mode.
OFF: Enables switching to the Sleep Mode in the Normal Mode.
ON: Disables switching to the Sleep Mode in the Normal Mode.
Procedure
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Confirm that [Printer Diag] is selected, and then press the [OK] button.
3 Use the [T] button to select [IOT Diag], and then press the [OK] button.
4 Use the [T] button to select [Dew Prevention], and then press the [OK] button.
5 Use the [S] or [T] button to change the ON/OFF setting, and then press the [OK] button for con-
firmation.
6 Press the [C(Clear)] button to return to the [Printer Diag] screen.
7 Exits the CE mode. (See "6.4.4 How to Exit the CE Mode".)
Printer Diag
IOT Diag
IOT Diag
Digital Input
IOT Diag
Dew Prevention
Dew Prevention
OFF*
To Next Page
Loading...
Need help?
General
