Chapter 6 General
6.11 Board Diag (Board Test)
6-74
6.11.4 ASIC Test
Provides the ASIC built-in IJAC and JBIG tests.
6.11.5 Relay/Signal Test
Table 6-48 All Test
Test Result Display
Remarks
Normal Error
CHECK OK *** Test Check NG
***: Displays the name of the test ended in error.
ASIC IJAC / ASIC JBIG
Table 6-49 Relay/Signal Test
Item Range Description
Relay Test
Relay Toggle
Test
0150 - 9999
Toggles the Relay signal at the specified fre-
quency.
Relay Set Test ON, OFF Outputs the Relay signal at a specified level.
Hook Test
Hook Toggle
Test
0150 - 9999
Toggles the Hook signal at the specified fre-
quency.
Hook Set Test ON, OFF Outputs the Hook signal at a specified level.
Single Tone
Send
0Hz
－
Continuously sends the tone of the selected
frequency.
400Hz
462Hz
1080Hz
1100Hz
1300Hz
1500Hz
1650Hz
1850Hz
2100Hz
500Hz
600Hz
900Hz
1000Hz
DTMF Send
DTMF Continu-
ous
0 - 9, A - D, *, # Continuously sends the DTMF signal.
DTMF Individu-
ally
16 digits
(each digit 0-9,
A-D, *, #)
Sends the multi-digit DTMF signal.
To Next Page
Loading...
Need help?
General
