Fuji Xerox DocuPrint M355df User Manual

Chapter 3 Image Quality Troubleshooting
3.2 Image Quality Troubleshooting
3-35
10
Checking after resetting the Paper Cassette.
Reseat the Paper Cassette.
Is the image printed correctly?
End of work. Go to step 11.
11
Check the paper humidity conditioning effect.
Load the unopened (or sealed and stored under humidity con-
trol) and recommended paper, and then perform a test print.
Is the image printed correctly?
End of work. Go to step 12.
12
Checking the side guides of the Paper Cassette.
Reset the side guide.
Is the image printed correctly?
End of work. Go to step 13.
13
Checking after resetting the Transfer Unit.
Reseat the Transfer Unit.
Is the image printed correctly?
End of work. Go to step 14.
14
Checking after resetting the FUSING UNIT.
Reseat the FUSING UNIT.
Is the image printed correctly?
Start the operation after the FUSING UNIT has cooled
down.
End of work. Go to step 15.
15
Checking after replacing the FUSING UNIT.
Replace the FUSING UNIT.
Is the image printed correctly?
Start the operation after the FUSING UNIT has cooled
down.
NOTE
After replacement, be sure to clear the life counter value.
End of work.
Replace the
printer.
Step Check and Action Yes No

Fuji Xerox DocuPrint M355df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M355df
Category	Printer
Language	English