Fuji Xerox DocuPrint M355df

Chapter 6 General
6.6 IOT Diag
6-45
4 Press the [OK] button.
5 Use the [S] or [T] button to select [041-300].
6 Press the [OK] button.
7 Open and close the front cover to check that the display changes as shown below.
8 Press the [C(Clear)] button to stop the test.
9 Press the [C(Clear)] button to return to the [Printer Diag] screen.
10 Exits the CE mode. (See "6.4.4 How to Exit the CE Mode".)
IOT Diag
Digital Input
Digital Input
010-200 OFF
Digital Input
041-300 OFF
Digital Input
041-300 L 00
Digital Input
041-300 H 00
Digital Input
041-300 L 01
Cover Open Cover Close
Digital Input
041-300 OFF
Printer Diag
IOT Diag