Chapter 6 General
6.10 Parameter Settings (Parameter)
6-71
6 Press the [OK] button to display the value.
7 To initialize the life counter value of Fusing Heattime, press the [C(Clear)] button to return to the
level immediately previous to the level where you displayed the value, use the [T] button to
select [Initialize], and then select the [OK] button.
8 Press the [C(Clear)] button to return to the [Printer Diag] screen.
9 Exits the CE mode. (See "6.4.4 How to Exit the CE Mode".)
Fusing Heattime
Initialize
Fusing Heattime
Read
To Next Page
Loading...
