Fuji Xerox DocuPrint M355df

Chapter 2 Troubleshooting
2.2 Status Code List
2-14
016-931
USB Host Error
Hub is not supported
016-931
Remove from USB
Port
<USB Host Error>
Warning to installation of hub that cannot be used to
USB host.
Detect installation of hubs in more than supported
number of stacks.
Replace the
PWBA ESS.
(REP18.1)
016-982
RAM Disk Full
016-982
Job too Large
Press OK Button
<Disk Full>
The current printing job process cannot be contin-
ued because the RAM disk is full.
Upgrade mem-
ory as required
016-985
Email Size Limit
016-985
Press OK Button
<Mail Size Error>
Exceed the max mail size specified on the menu.
Replace the
PWBA ESS.
(REP18.1)
016-986
File Size Limit
016-986
Press OK Button
<File Size Error>
As a result of conversion to the specified format,
exceed the max file size specified for each format.
Replace the
PWBA ESS.
(REP18.1)
017-600
System
Initialize User Data
Initializing...
<Address Info Sum Check Fail>
At POWON start-up, checking phone book and
address book data and initializing incorrect data
automatically.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
017-970
MFP Memory Full
017-970
Press OK Button
<MFP Memory Full>
AIOC memory run out.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
017-971
MFP Controller Error
017-971
Press OK Button
<MFP Controller Error>
Write error of image data storage Flash ROM.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
017-972
MFP Controller Error
017-972
Press OK Button
<MFP Controller Error>
Erase error of image data storage Flash ROM.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
017-973
MFP Controller Error
017-973
Press OK Button
<MFP Controller Error>
Suspend error of image data storage Flash ROM.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
Status
Code
LCD Message Name/Description of Error FIP