Chapter 6 General
6.15 Backup (BackUP Data)
6-101
Procedure
The following procedure describes how to clear data using [User Clear] as an example.
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Use the [T] button to select [Fax/Scanner Diag], and then press the [OK] button.
Broadcast CRB Document Number 333
Management Data in One Broadcast Job 333
One Broadcast Job Result 333
Substitute Queue 33 3 3 3
Receiving Document Information 33 3 3 3
Document Number 33 3 3 3
Document Management Table 33 3 3 3
Directory Management Table 33 3 3 3
FAT Chain Table 33 3 3 3
FAT Chain Save Area 33 3 3 3
FAT Deletion Status Table 33 3 3 3
Sector Erase Count Table 3
Garbage Collection Information 33 3 3 3
Sector for Garbage Collection 33 3 3 3
Reserved Sector for Garbage Collection 33 3 3 3
Fax Communication Speed Counter 3
ADF Scan Counter 3
Platen Scan Counter 3
Total Signal Number 333
Signal Data Buffer Pointer 333
Signal Information Table 333
Signal Data Buffer 333
Number of SCJL Job Log Registrations 333
SCJL Job Log Data 333
Backup Check Data 2 3
Backup Data Status 3
Backup RAM Bottom 3
Table 6-62 Initialization Target Data
Data All User System
User&
System
Document
System
Data
To Next Page
Loading...
Need help?
General
