Chapter 2 Troubleshooting
2.2 Status Code List
2-16
017-987
MFP Controller Error
017-987
Press OK Button
<MFP Controller Error>
Cannot read file because it is bigger than read des-
tination buffer.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
017-988
Scan Time Out
017-988
Press OK Button
<Scan Time Out>
Timeout at start of Scan To Application.
Install the cor-
rect Driver
Software
017-989
MFP Controller Error
017-989
Press OK Button
<MFP Controller Error>
Stop writing because size of file to be written is big-
ger than read destination buffer (even if file writing
is continued, it is impossible to read the file).
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
017-990 -
<IIT Auto Registration Adjustment Fail>
Fail to adjust IIT registration automatically at start-
up.
Set to default value and continue processing.
Replace the IIT
ASSY
(REP 21.1)
017-991 -
<IIT Level Adjustment Fail>
At the start of IIT read job, fail to adjust IIT level.
Set to default value and continue processing.
Replace the IIT
ASSY
(REP 21.1)
024-340
MCU Firmware Error
024-340
Code:xxxxxxxx
Restart Printer
<MCU Firmware Error>
MCU firmware error occurs.
Update to the
latest F/W
If the problem
cannot be
solved, replace
the PWBA
MCU (REP
18.2)
024-360
Download Mode
024-360
Send FW Data
<MCU DownLoad Error>
Download failure of MCU firmware.
Update to the
latest F/W
If the problem
cannot be
solved, replace
the PWBA
MCU (REP
18.2)
024-362
IOT Start Error
024-362
Restart Printer
<IOT Start Image Marking Timeout>
“Start Image Making” has not been issued within the
time allowed.
Update to the
latest F/W
If the problem
cannot be
solved, replace
the PWBA ESS
(REP 18.1)
024-371
MCU Comm. Error
024-371
Restart Printer
<MCU-ESS Communication Fail>
Communication fail between MCU and ESS.
FIP1.7
Status
Code
LCD Message Name/Description of Error FIP
To Next Page
Loading...
