Chapter 2 Troubleshooting
2.3 Error Code FIP
2-56
7
Check the REGI. CLUTCH operation
Execute the Diag Digital Output [071-006] to check the
operation of the REGI. CLUTCH.
Is the REGI. CLUTCH operating normally?
Go to Step 8. Go to FIP2.8
8
Check the operation of the DRIVE ASSY MAIN
Execute the Diag Digital Output [071-001] to check the
rotation of the DRIVE ASSY MAIN.
Is it working properly?
Replace the
PWBA MCU.
(REP 18.2)
Go to FIP2.12
Step Check and Action Yes No
To Next Page
Loading...
