106 Upgrade and Maintenance Manual TX2550 M4
Basic software procedures
I This will temporarily disable BitLocker for maintenance purposes.
The volume will not be decrypted and no keys will be discarded.
Ê Click Start - Control Panel - System and Security - BitLocker Drive Encryption
to open the BitLocker Drive Encryption.
Ê Select the system volume, and click Suspend Protection.
Ê Click Yes to confirm that your data will not be protected while BitLocker is
suspended.
I In order to determine which features are accessible through the
BitLocker setup wizard, it may be necessary to modify the BitLocker
Group Policy settings.
For more information on how to suspend BitLocker drive encryption, see
the Microsoft TechNet library at
http://technet.microsoft.com/library/cc731549.aspx.
For more information, see the Fujitsu web pages.
5.1.2 Disabling the boot watchdog functionality of
ServerView Operations Manager
The ServerView Operations Manager boot watchdog determines whether the
server boots within a preset time frame. If the watchdog timer expires, the
system will automatically reboot.
5.1.2.1 Viewing boot watchdog settings
Viewing boot watchdog settings in the BIOS
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Watchdog, you can obtain more information about the current
watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I For more information on BIOS settings, see the corresponding BIOS
Setup Utility reference manual.
To Next Page
Loading...
