Fujitsu PRIMERGY TX2550 M4 - Indicator on the ODD

TX2550 M4 Upgrade and Maintenance Manual 505
Appendix A
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC Firmware 7.14 or later
– supported OOB RAID system
18.2.2.2 Indicator on the ODD
Figure 365: Indicator on the ODD
I There are also ODDs without activity indicators.
Pos. Indicator Status Description
1
Activity
indicator
off The ODD is inactive.
green on The storage medium is being accessed.