Fujitsu PRIMERGY TX2550 M4 - Concluding Steps

488 Upgrade and Maintenance Manual TX2550 M4
Cabling
17.1.4 Concluding steps
Ê Install the fan bridge, see section "Handling fan bridges" on page 90
Ê "Installing the system air duct" on page 68
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
17.2 Replacing the OOB cable
I There are different OOB cables depending on the OOB configuration.
17.2.1 Preliminary steps
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Ê "Removing the system air duct" on page 67
Ê Remove the fan bridge, see section "Handling fan bridges" on page 90.
17.2.2 Replacing the OOB cable
I Replacing the OOB cable is illustrated by the example with two
backplanes and extension box.
Field Replaceable Unit
(FRU)
Average task duration:
10 minutes
Tools: tool-less