TX2550 M4 Upgrade and Maintenance Manual 405
13 Front panel
Safety notes
V CAUTION!
● When inserting the front panel module into the server, ensure not to
pinch or strain any connected cables.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● For more information, see chapter "Important information" on
page 37.
13.1 Replacing the front panel module
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Software: 5 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Side cutter (for cable tie)
To Next Page
Loading...
