208 Upgrade and Maintenance Manual TX2550 M4
Hard disk drive (HDD) / solid state drive (SSD)
Figure 126: Removing the screws of the SAS expander board
Ê Remove the five screws (see circles).
Ê Remove the SAS expander board from the SAS expander board holder.
7.3.12.3 Installing the SAS expander board
Figure 127: Installing the SAS expander board
Ê Position the SAS expander board on the SAS expander board holder.
Ê Ensure that the SAS expander board is properly seated on both centering
bolts (see circles).
Ê Fasten the SAS expander board to the SAS expander board holder with the
five screws (see figure 126).
To Next Page
Loading...
