EasyManua.ls Logo

Fujitsu PRIMERGY TX2550 M4 - CMOS Battery

Fujitsu PRIMERGY TX2550 M4
563 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX2550 M4 Upgrade and Maintenance Manual 415
System board and components
14.2 CMOS battery
14.2.1 Replacing the CMOS battery
Safety notes
V CAUTION!
The CMOS battery (CR2032) must be replaced with an identical
battery or with a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For more safety information, see section "Environmental protection"
in the operating manual of your server.
Ensure to insert the CMOS battery with the positive pole facing
up!
14.2.1.1 Preliminary steps
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less; recommended: tooth pick

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M4

Related product manuals