Fujitsu PRIMERGY TX2550 M4 - Concluding Steps

TX2550 M4 Upgrade and Maintenance Manual 353
Main memory
10.3.3 Concluding steps
Ê "Installing the system air duct" on page 68
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Ê "Resuming BitLocker functionality" on page 127
10.4 Replacing memory modules
10.4.1 Preliminary steps
Ê "Locating the defective server" on page 49
Ê "Suspending BitLocker functionality" on page 105
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Ê "Removing the system air duct" on page 67
Ê "Locating the defective component" on page 51
10.4.2 Removing the defective memory module
Ê Remove the memory module, see section "Removing memory modules" on
page 352.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: tool-less