EasyManua.ls Logo

Fujitsu PRIMERGY TX2550 M4 - Removing the Defective TPM

Fujitsu PRIMERGY TX2550 M4
563 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
426 Upgrade and Maintenance Manual TX2550 M4
System board and components
14.3.3.2 Removing the defective TPM
Ê Remove the TPM, see section "Removing the TPM" on page 421.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.3.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the TPM, see section "Installing the TPM" on page 418.
14.3.3.4 Concluding steps
Ê Install the fan bridge, see section "Handling fan bridges" on page 90.
Ê "Installing the crossbar" on page 89
Ê If applicable, "Installing the riser module" on page 85
Ê "Installing the PCI air duct" on page 87
Ê "Installing the system air duct" on page 68
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Ê "Resuming BitLocker functionality" on page 127
I You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M4

Related product manuals