Fujitsu PRIMERGY TX2550 M4 - Removing an Accessible Drive

386 Upgrade and Maintenance Manual TX2550 M4
Accessible drives
12.3.2 Removing an accessible drive
Ê Remove all cables from the accessible drive.
Ê Disengage the accessible drive locking bar, see section "Opening the
accessible drive locking bar" on page 94.
Figure 278: Removing the accessible drive
Ê Carefully pull the accessible drive out of its installation bay.
Ê Engage the locking bar, see section "Closing the accessible drive locking
bar" on page 96.
12.3.3 Installing accessible drive dummy covers
Ê If applicable, install accessible drive filler covers, see section "Accessible
drive filler covers" on page 98.
Ê If applicable, install accessible drive covers, see section "Accessible drive
covers" on page 100.