Fujitsu PRIMERGY TX2550 M4 - Converting a Floorstand Model to a Rack Model

TX2550 M4 Upgrade and Maintenance Manual 465
16 Converting a floorstand model to
a rack model
Safety notes
For more information, see chapter "Important information" on page 37.
16.1 Preliminary steps
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê Remove all external cables.
Ê "Getting access to the component" on page 54
I The front cover is no longer required.
Ê "Removing the anti-tilt bracket" on page 103
Field Replaceable Unit
(FRU)
Average task duration:
20 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver