430 Upgrade and Maintenance Manual TX2550 M4
System board and components
14.4.2.3 Concluding steps
Ê If applicable, install the riser module, see section "Installing the riser module"
on page 85.
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
14.4.3 Replacing the iRMC microSD card
14.4.3.1 Preliminary steps
Ê "Locating the defective server" on page 49.
Ê "Shutting down the server" on page 52.
Ê "Disconnecting the power cord" on page 53.
Ê "Getting access to the component" on page 54
Ê If applicable, remove the riser module, see section "Removing the riser
module" on page 84.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: a pair of side-cutting pliers
To Next Page
Loading...
