TX2550 M4 Upgrade and Maintenance Manual 305
Expansion cards and backup units
Figure 213: Installing the OCP module (B)
Ê Install the OCP carrier in the OCP module slot (see arrow).
9.4.1.3 Concluding steps
Ê If applicable, install the riser module, see section "Installing the riser module"
on page 85.
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Ê Inform the customer about changed WWN and MAC addresses. For more
information, see section "Looking up changed MAC/WWN addresses" on
page 129.
Ê "Updating the NIC configuration file in a Linux and VMware environment" on
page 126
Ê "Configuring LAN teaming" on page 131
To Next Page
Loading...
