Fujitsu PRIMERGY TX2550 M4 - Removing Memory Modules

352 Upgrade and Maintenance Manual TX2550 M4
Main memory
10.3 Removing memory modules
10.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 105
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Ê "Removing the system air duct" on page 67
10.3.2 Removing a memory module
Figure 253: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
Figure 254: Removing memory modules (B)
Ê Remove the ejected memory module.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less