Fujitsu PRIMERGY TX2550 M4 - Handling Fan Bridges; Removing the Fan Bridge with Fan Modules (High Performance Variant)

90 Upgrade and Maintenance Manual TX2550 M4
Basic hardware procedures
4.11 Handling fan bridges
4.11.1 Removing the fan bridge with fan modules (high
performance variant)
Figure 45: Removing the fan bridge (high performance variant)
Ê Press on the two locking tabs (1) while slightly lifting up the fan bridge.
Ê Remove the fan bridge (2).
Ê Remove all fan modules from the fan bridge, see section "Removing the
defective system fan module" on page 287.