TX2550 M4 Upgrade and Maintenance Manual 479
Converting a floorstand model to a rack model
16.3 Concluding steps
Ê "Installing the top cover" on page 70
Ê Install the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I The document is available online.
Ê "Installing the server in the rack" on page 72
Ê Connect all external cables.
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Ê Update your server’s chassis information on the Chassis ID EPROM
integrated into the front panel board. For more information on how to obtain
and use the ChassisId_Prom Tool, see section "Using the Chassis ID Prom
Tool" on page 130.
Ê Change the chassis model setting to "rack model", see section "Specifying
the chassis model" on page 134.
To Next Page
Loading...
