TX2550 M4 Upgrade and Maintenance Manual 427
System board and components
14.4 iRMC microSD card
I The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
14.4.1 Installing the iRMC microSD card
14.4.1.1 Preliminary steps
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Ê If applicable, remove the riser module, see section "Removing the riser
module" on page 84.
14.4.1.2 Installing the iRMC microSD card
Figure 304: iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
