Fujitsu PRIMERGY TX2550 M4 - Installing the 8 X 2.5-Inch HDD;SSD Extension Box

TX2550 M4 Upgrade and Maintenance Manual 243
Hard disk drive (HDD) / solid state drive (SSD)
7.5.2.4 Installing the 8x 2.5-inch HDD/SSD extension box
Figure 157: Bending in mounting brackets
Ê Using a screw driver, bend the four mounting brackets of the middle
installation bay (bay 2) inwards (see close-up):
Ê Bend in the lower two mounting brackets on each side of the drive cage.
Ê Disengage the accessible drive locking bar, see section "Opening the
accessible drive locking bar" on page 94.