244 Upgrade and Maintenance Manual TX2550 M4
Hard disk drive (HDD) / solid state drive (SSD)
Figure 158: Inserting the 8x 2.5-inch HDD/SSD extension box
Ê Insert the 8x 2.5-inch HDD/SSD extension box into installation bays 2 and 3
and carefully push in until it lines up with the front panel.
Ê Engage the locking bar, see section "Closing the accessible drive locking
bar" on page 96."Installing the SAS expander board" on page 275
Ê If applicable, install the expander board, see section "Installing the SAS
expander board" on page 275.
To Next Page
Loading...
