436 Upgrade and Maintenance Manual TX2550 M4
System board and components
14.5.2 Removing the M.2 SSD
14.5.2.1 Preliminary steps
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Ê "Removing the system air duct" on page 67
Ê "Removing the PCI air duct" on page 86
Ê If applicable, "Removing the riser module" on page 84
Ê "Removing the crossbar" on page 88
Ê If applicable, "Removing an expansion card" on page 318
14.5.2.2 Removing the M.2 SSD
Figure 311: Removing the M.2 SSD (A)
Ê Remove the screw (see circle).
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver (for moving the screw to another bolt)
To Next Page
Loading...
