80 Upgrade and Maintenance Manual TX2550 M4
Basic hardware procedures
4.5.3.4 Locking the server
Figure 32: Locking the server
Ê Insert the key into the lock on the HDD cover (1).
Ê Turn the key counter-clockwise (2) to lock the front and side covers.
Ê Remove the key from the server front.
Figure 33: Storing the key ring
Ê Insert the keychain into the slot on the server rear (1).
Ê Turn the keychain clockwise by 90 degrees (2) until it latches in place as
shown (3).
To Next Page
Loading...
