Fujitsu PRIMERGY TX2550 M4 - Replacing the Serial Interface

464 Bearbeitungsstand Bestellnummer
Serial interface
15.1.3 Replacing the serial interface
15.1.3.1 Preliminary steps
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
15.1.3.2 Removing the defective serial interface
Ê Remove the serial interface, see section "Removing the serial interface" on
page 463.
15.1.3.3 Installing the new serial interface
Ê Install the serial interface, see section "Installing the serial interface" on
page 460.
15.1.3.4 Concluding steps
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: hexagon screw driver 5 mm