Fujitsu PRIMERGY TX2550 M4 - Connecting External Devices and Peripherals to the Server

TX2550 M4 Upgrade and Maintenance Manual 51
Basic hardware procedures
Ê For more diagnostics, proceed as follows:
– Hardware errors:
Check the System Event Log (SEL), see section "Viewing the SEL" on
page 123.
– Software / agent related errors:
Check the ServerView System Monitor, available on Windows or Linux
based servers with ServerView agents installed.
I For more information, see the "ServerView System Monitor" user
guide.
4.1.3 Locating the defective component
After determining the error class by the CSS or Global Error indicators (see
section "Determining the error class" on page 50), local diagnostic indicators
on the system board, HDD modules and PSUs (only slide-in units) allow you to
identify the defective component.
I For more information, see the "ServerView Suite Local Service Concept
(LSC)" manual.
4.1.3.1 Local diagnostic indicators on the front
Ê Check the CSS indicator (see section "Onboard indicators and controls" on
page 499) on the front panel or the I/O panel of the server.
I In addition to local diagnostic indicators, CSS or Global Error LEDs
indicate, if the defective component is a customer or field replaceable
unit.