TX2550 M4 Upgrade and Maintenance Manual 351
10.2.2 Selecting the memory slot
Ê Choose the memory slot according to the configuration rules in "Basic
information" on page 346.
10.2.3 Installing a memory module
Figure 251: Opening the securing clips
Ê Press the securing clips on both sides of the memory slot concerned
outward.
Figure 252: Installing a memory module
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.4 Concluding steps
Ê "Installing the system air duct" on page 68
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Ê "Resuming BitLocker functionality" on page 127
To Next Page
Loading...
