TX2550 M4 Upgrade and Maintenance Manual 449
System board and components
Ê Using a pair of side-cutting pliers, cut the microSD card in half.
Ê Install the new microSD card on the Dual microSD 64GB Enterprise.
Proceed as described in the following:
Ê With the label facing up, insert the microSD card into the microSD slot on
the controller until it locks in place (see figure 324 on page 447).
Ê Install the Dual microSD 64GB Enterprise, see section "Installing the Dual
microSD 64GB Enterprise" on page 439.
14.6.4.3 Concluding steps
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
To Next Page
Loading...
