EasyManua.ls Logo

Fujitsu PRIMERGY TX2550 M4 - Installing the 2.5-Inch HDD Bay Top Cover; Installing the 16 X 2.5-Inch HDD Front Panel; Installing the Expander Board

Fujitsu PRIMERGY TX2550 M4
563 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX2550 M4 Upgrade and Maintenance Manual 211
Hard disk drive (HDD) / solid state drive (SSD)
7.3.13.5 Installing the 2.5-inch HDD bay top cover
Ê Install the 2.5-inch HDD bay top cover, see section "Installing the 2.5-inch
HDD bay top cover" on page 193.
7.3.13.6 Installing the 16x 2.5-inch HDD front panel
Figure 129: Securing the 16x 2.5-inch HDD front panel
Ê Fit the three hooks on the 2.5-inch HDD front panel into the slots in the
server front (see small arrows).
Ê Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see arrow).
Ê Secure the HDD front panel to the server front with four M3 x 4.5 mm screws
(see circles).
7.3.13.7 Installing the expander board
Ê Install the expander board, see section "Installing the SAS expander board"
on page 275.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M4

Related product manuals