TX2550 M4 Upgrade and Maintenance Manual 431
System board and components
14.4.3.2 Replacing the iRMC microSD card
Ê Remove the defective iRMC microSD card, see section "Removing the
iRMC microSD card" on page 429.
V CAUTION!
The microSD card contains customer information. After replacing the
microSD card, hand the defective card over to the customer. If the
customer requests disposal of the defective microSD card, proceed
as follows:
Ê Using a pair of side-cutting pliers, cut the iRMC microSD card in
half.
Ê Install the new iRMC microSD card, see section "Installing the iRMC
microSD card" on page 427.
14.4.3.3 Concluding steps
Ê If applicable, install the riser module, see section "Installing the riser module"
on page 85.
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
To Next Page
Loading...
