TX2550 M4 Upgrade and Maintenance Manual 411
Connecting front panel cables to the system board
Figure 296: Disconnecting the front panel cables
Ê Run the front panel cables through the cable guide (3).
Ê Connect the front panel cable to the system board (1).
Ê Connect the front USB cable to the system board (2).
13.1.6 Concluding steps
Ê Install the fan bridge, see section "Handling fan bridges" on page 90
Ê "Installing the system air duct" on page 68
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81
Ê "Switching on the server" on page 82
Ê "Verifying system information backup/restore" on page 113
To Next Page
Loading...
