TX2550 M4 Upgrade and Maintenance Manual 409
13.1.3 Removing cables from the front panel module
Figure 293: Removing the front panel cables
Ê Open the cable tie (1) and remove the front panel cable (2).
Ê Remove the two screws (3) and remove the front USB cable (4).
13.1.4 Connecting cables to the front panel module
Ê Connect the front panel cable to the new front panel module and secure it to
the lug with a new cable tie (see figure 293).
Ê Connect the front USB cable to the new front panel module and secure it
with two screws (see figure 293).
To Next Page
Loading...
