EasyManua.ls Logo

Fujitsu PRIMERGY TX2550 M4 - Removing the Defective HDD;SSD Backplane

Fujitsu PRIMERGY TX2550 M4
563 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX2550 M4 Upgrade and Maintenance Manual 249
Hard disk drive (HDD) / solid state drive (SSD)
7.5.4.2 Removing the defective HDD/SSD backplane
Ê Unlock and pull the 8x 2.5-inch HDD/SSD extension box out of its installation
bays, see section "Removing the 8x 2.5-inch HDD/SSD extension box" on
page 246.
Figure 161: Removing the HDD/SSD backplane (A)
Ê Remove the four screws (see circles).
Figure 162: Removing the HDD/SSD backplane (B)
Ê Fold up the HDD/SSD backplane (1) and at a slight angle, remove it from the
recesses in the HDD/SSD extension box (2).

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2550 M4

Related product manuals