TX2550 M4 Upgrade and Maintenance Manual 429
System board and components
14.4.2 Removing the iRMC microSD card
14.4.2.1 Preliminary steps
Ê "Shutting down the server" on page 52
Ê "Disconnecting the power cord" on page 53
Ê "Getting access to the component" on page 54
Ê If applicable, remove the riser module, see section "Removing the riser
module" on page 84.
14.4.2.2 Removing the iRMC microSD card
Figure 306: Removing the iRMC microSD card
Ê To eject the iRMC microSD card, gently push it in and then let go (1).
Ê Pull the iRMC microSD card straight out of its slot (2).
V CAUTION!
The iRMC microSD card contains customer information. After removing
the iRMC microSD card, hand the card over to the customer.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: a pair of side-cutting pliers
To Next Page
Loading...
