TX2550 M4 Upgrade and Maintenance Manual 407
13.1.2 Removing the front panel module
Removing front panel cables from the system board
Figure 290: Disconnecting the front panel cables
Ê Disconnect the front panel cable from the system board (1).
Ê Disconnect the front USB cable from the system board (2).
Ê Remove all front panel cables from the cable guide (3).
Removing the front panel module
I Unlocking and securing the front panel is illustrated by the example of the
rack model. In case of floorstand models, the accessible drive locking bar
is located on the top of the drive bay. For more information, see section
"Opening the accessible drive locking bar" on page 94.
To Next Page
Loading...
