Fujitsu PRIMERGY TX2550 M4 - Installing the Ultraslim ODD into the Ultraslim ODD Adapter

TX2550 M4 Upgrade and Maintenance Manual 399
Accessible drives
12.6.1.2 Installing the ultraslim ODD into the ultraslim ODD adapter
Figure 286: Removing the ultraslim ODD dummy cover - ultraslim ODD adapter
Ê Remove the ultraslim ODD dummy cover from the ultraslim ODD adapter.
V CAUTION!
Keep the dummy cover for future use. If a ultraslim ODD is removed and
not immediately replaced by a new one, a ultraslim ODD dummy cover
must be replaced in the slot to comply with applicable EMC regulations
and satisfy cooling requirements.
Figure 287: Installing the ultraslim ODD in the ultraslim ODD adapter (A)
Ê Insert the ultraslim ODD into the ultraslim ODD adapter.