Fujitsu PRIMERGY TX2550 M4 - Connecting the Cable to a Non-Hot-Plug HDD;SSD; Concluding Steps

272 Upgrade and Maintenance Manual TX2550 M4
Hard disk drive (HDD) / solid state drive (SSD)
Figure 183: Installing the non-hot-plug cage (B)
Ê Fasten the non-hot-plug cage with one screw (see circle).
7.7.1.6 Connecting the cable to a non-hot-plug HDD/SSD
Figure 184: Connecting the cable to the non-hot-plug HDDs/SSDs
Ê Connect the cable(s) to the non-hot-plug HDDs/SSDs (1, 2).
I For the cable plan see chapter "Appendix B" on page 517.
7.7.1.7 Concluding steps
Ê "Reassembling" on page 68
Ê "Connecting the power cord" on page 81